The RMB-1585, Rotel’s new flagship theatre amplifier, provides both the massive power and sonic sophistication required by the finest home theatre systems. With five channels, each capable of producing 200 continuous watts each into 8 ohm loads (a full kilowatt of output power!), the RMB-1585 masters any A/V system regardless of speaker load or room size.
But it isn’t just pure output power that distinguishes the RMB-1585. It’s the ability to reproduce both the dynamics of a Hollywood blockbuster and the musical nuances of acoustic instruments that sets it apart. Where does this balance come from? It’s a direct result of Rotel’s celebrated Balanced Design Concept in which circuit topology and parts selection meld in the pursuit of sonic excellence.
*Note – all Rotel 15 series components may be rack mounted and remotely controlled via RS-232, IR, or 12 volt (depending on model) for complete stealth operation.
|Continuous Power Output
(20-20kHz, < 0.03%, 8 ohms)
5 channel driven
|Total Harmonic Distortion
(20Hz-20kHz, 8 ohms)
(60Hz : 7kHz, 4:1)
(+0.5, –3 dB)
|10Hz - 100kHz|
(20-20,000Hz, 8 ohms)
|Speaker Impedance||4 ohms minimum|
|Signal to Noise Ratio
(IHF A network)
|Unbalanced||12k ohms/1.9 volt|
|Balanced||100k ohms/3.8 volt|
|U.S. version||120 volts, 60Hz|
|European version||230 volts, 50Hz|
|Power Consumption||1100 watts|
|Width x Height x Depth||431 x 237 x 454mm
17 x 9 3/8 x 17 7/8 in
|Front Panel Height||5U / 221mm / 8 3/4 in|
|Weight (net)||36kg / 79.3 lb|
*Reprint from Manufacturers Website.