Totem Acoustic Wind Floorstanders Pair

Usually Ships in 48-72 Hours
Free Shipping

Product Overview

A powerful presence

Since its inception, the Wind has been appreciated for its avant-garde design and superior sonic architecture. Its complex cabinet geometry has masterfully made this dynamic, multi-driver speaker sound “Totem Great”.

A totally unique (4x) driver 3-way speaker system, the Wind stands for flexibility and truly full-range expressiveness. The multiple midranges allow for an incredible amount of musically informative material to transpire in space with ease. The sound level possibilities of this large dynamic system also facilitate large and complex musical demonstrations. Design and performance are brought forth in a flexible and manageable equilibrium. Also available in Design finish.


Design features

  • Avant-garde design
  • Superior sonic architecture
  • Complex cabinet geometry
  • Absolute surreal holographic imaging
  • Available in exotic veneer or Design multicoated polyester finishes

Technical features

  • Totally unique (4x) driver 3-way speaker system
  • On- and off-axis point source imaging
  • Specially damped, long-throw woofer
  • Special low resonance tweeter with chamber
  • Multiple midranges
  • Extreme-quality hard-wired crossover


Break in time: 200 - 250 hours
Placement from rear wall: 3' - 7' / 914 - 2,134 mm
Placement distance apart: 6' - 14' / 1,828 - 4,267 mm
Frequency Response: 24 Hz - 21 kHz ± 3 dB (in room)
Impedance: 4 ohms
Sensitivity: 87 dB
Recommended Power: 80 - 250 W
Crossover frequency: Woofer to mids 
2nd order / 2nd order 
Mids to tweeter 
2nd order / 2nd order
Woofer: 8.5" / 220 mm cast frame, 
specially damped. 
High power handling. 
Long throw characteristics.
Mid-Woofers (2): 3" / 76 mm voice coil. Cast frame. High power handling. 
Wrap-around neodymium 
magnet structure. 
Accurate linear throw.
Tweeter: 1" / 25 mm alloy dome flexible 
linear suspension. 
Special low resonance 
tweeter with chamber.
Max SPL's: In average room 
(12' x 20' / 4 m x 6 m) 
114 dB peak from pair at 7' / 2 m
Dimensions (w x h x d): 10.7 x 44.3 x 14" 
273 x 1,125 x 355 mm 
(over max. size)

The speakers require several hours of actual music playing time as a minimal break-in period. During this time, refrain from playing them at very loud levels. You will notice a definite gradual improvement in the cohesiveness of the music reproduction as this occurs.

It is only through the support of advocates such as yourself that true sound can be promoted...

Toe-in: Due to the fact that all Totem speakers have great off-axis dispersion, toe-in is generally not needed. Imaging will therefore be more stable from any point in the room. If the speakers are placed very far apart (over 7 feet) then a slight toe-in may be experimented with. However if room geometry does not permit a straight-ahead aspect they will also perform very well with a slight toe-in.

*Reprint from Manufacturers Website.

Warranty Information

Five Year Limited Warranty