Canor Virtus I2.120 – Black Finish Only
If you've been waiting for the right opportunity to step into true high-end amplification, this deal is one you won't want to miss. The Canor Virtus I2.120 is a beautifully handcrafted integrated amplifier that delivers exceptional clarity, effortless power and the rich, natural musicality Canor has become renowned for.
For a limited time, we're offering an incredible deal on the Black finish only.
Normally $12,995 each, you can purchase two Canor Virtus I2.120 amplifiers for just $20,000. That's a massive $5,990 saving.
The beauty of this offer is that these amplifiers can be configured as monoblocks, with one amplifier dedicated to each speaker. This provides greater power, improved channel separation, increased dynamics and effortless control over even the most demanding loudspeakers. The result is a bigger, more engaging soundstage with exceptional detail, authority and realism.
Whether paired with ATC, KEF, Bowers & Wilkins, Spendor, Klipsch Heritage or other premium speakers, a pair of Canor Virtus I2.120s delivers reference-level performance that rivals far more expensive separates.
Special Offer – Black Finish Only
-
Canor Virtus I2.120 (Black)
-
Normally: $12,995 each ($25,990 per pair)
-
Special Price: Two for $20,000
-
Save: $5,990
-
Run as Monoblocks for Ultimate Performance
This offer is strictly limited to the Black finish and is available only while stocks last. If you've been looking to build a world-class hi-fi system, this is an outstanding opportunity to own one of Canor's finest amplifiers at an exceptional price.
The Premium Line Integrated Solid-State Amplifier from Canor
CANOR AI 1.20 is an in A, delivering up to 50 W per channel with a relay attenuator and 50 W per channel with a relay attenuator with two standalone blocks for each channel.
Highlights
- Operates in a pure class A
- 264 000 μF of total filtering capacitance
- Possibility to create a monoblock connection of two units.
Heat Disposal
Canor used a special copper plate for heat dissipation, which is installed on the heatsink and the power transistors are installed directly on the given copper plate
Dual-Mono Connection
Dual-mono connection – each channel has its own power transformer. Power transformers are located in separate parts of the device.
Amplifier design
A shielded tunnel passes through the centre of the AI 1.20 amplifier, in which filters with nanocrystalline coils are located. In addition, the input circuits are equipped with low-noise JFET transistors.
Monoblock Connection
For even better performance and sound, it is possible to connect AI 1.20 as monoblocks using a data cable. One unit becomes the “master” unit and the other the “slave”.
This is the so-called bridge connection of two amplifiers (a fully symmetrical connection).
Product Features
- An integrated solid-state amplifier in pure class-A up to 50 W per channel
- Relay attenuator with two standalone blocks for each channel
- PCB’s utilise Canor's premium CMT™ technology (CANOR® PCB Milling Technology); it is the way we mill printed circuit boards
- CMT™ technology originated in a long-standing endeavour to improve the sonic performance of our products
- Power supply units with filtered out interfering signals from the mains supply
- Interference-rejection and as small a leakage field as possible ensure custom-wound toroidal transformers
- 264 000 uF of filtering capacitance simulates a nearly stabilised supply voltage
- Option of synchronous control enables the use of two amplifiers in a monoblock mode without the need of using an extra preamplifier and that is a Master/Slave mode with an output power of 100W per channel
Technical Specifications
Stereo Output Power
2 x 50 W / 4 Ω
2 x 30 W / 8 Ω
Monoblock Output Power
1 x 130 W / 4 Ω
1 x 100 W / 8 Ω
Gain
30 dB
Frequency Range
20 – 25 000 Hz ± 0.5 dB / 5 W
Input Impedance
30 kΩ
Inputs
5 x RCA
2 x XLR (XLR active in monoblock connection only)
Total Harmonic Distortion
<0.0 9% / 1 kHz, 5 W
Signal-to-Noise Ratio
> 90 dB
Signal-to-Noise Ratio Monoblock
> 100 dB
Filtration Capacity
132 000uF / 35V (per channel)
Damping factor at 4 Ω load at the output
250 (based on measured output impedance)
Damping factor at 8 Ω load at the output
500 (based on measured output impedance)
Power
230 V / 50 Hz / 375 VA
Dimensions (w x h x d)
435 x 170 x 485 mm
Weight (net)
28 Kg
*This information has been obtained from Manufacturers website. We advise that Features, Specifications & Price are subject change from Manufacturer without notice.
E&OE
