null
M & K Sound

M & K Sound X10 Subwoofer

Availability:
Usually Ships in 48 - 72 Hours
Shipping:
Free Shipping
On Sale
  • M & K Sound X10 Subwoofer, without grille
  • M & K Sound X10 Subwoofer, with grille
  • M & K Sound X10 Subwoofer, rear of sub
  • M & K Sound X10 Subwoofer, dimensions
Now: $2,999.00
Was: $5,999.00

Description

Introducing Mill & Kreisel's Iconic X10 Subwoofer

The Dual Powered THX Sub

M&K Sound X10 THX Ultra II Dual 10-Inch Subwoofer has been tailored specifically to fulfil M&K Sound’s ambitious performance requirements. Employing open baskets for free air circulation, resulting in minimal mechanical distortion by eliminating any captive compressed air mass behind the cone.

Cast baskets also offer a very rigid connection to the cabinet and improved heat dissipation from the motor system for reduced power compression.

MK Sound X10 THX Ultra II Dual 203 mm Subwoofer with dual 10” drive units, the X10 provides 156 sq. in. of cone area to move and control air, equivalent to a single 15” driver.

The Distortion Killers

The M&K Sound X Series implements aluminium AC shorting rings in the magnet system and aluminium pole spacers above the pole piece. These devices make a significant contribution to the X Series subwoofers’ ability to render extraordinary fine dynamic bass detail with high precision at all levels as the drivers maintain full control and respond instantaneously to the incoming signal, for unparalleled accuracy and authority in the bottom octaves.

Key Features

  • Left/Right  Line Level RCA input
  • Left/Right XLR Balanced input
  • LFE Passthrough Output: L/R Line level RCA & L/R XLR balanced
  • Push-Pull Dual Driver
  • Total Harmonic Distortion < 0.5%, 350 Watts, 4 Ohm
  • Optional THX or MK EQ mode

Technical Specifications 

Amplifier Power
350 Watts RMS / 650 Watts Peak 

Frequency Response
20 – 200 Hz +/- 2 dB

Total Harmonic Distortion
0.5%, 350 Watts, 4 Ohm
 

AC Power Consumption
0.5W standby, 55W average, 450W max.

AC Line Voltage
100-230 VAC 50/60 Hz 5A
 

LFE Input
L/R Line level RCA & L/R XLR balanced

LFE Passthrough Output
L/R Line level RCA & L/R XLR balanced

Switchable Lowpass Filters
Fixed 80 Hz / Variable / No lowpass

Phase
0-180 degrees, continuously variable

Volume control
Continuously variable / Fixed THX

Switchable LFE
Optional THX or MK EQ mode

Dimensions (H x W x D)
560 x 374 x 439 mm

Weight 
28 kg

 

*This information has been obtained from Manufacturers website. We advise that Price, Features & Specifications are subject change from Manufacturer without notice.

E&OE

View AllClose